Search

• Shampoo with Dualsenses Deep Cleansing Shampoo, then towel dry.

• Apply Structure + Shine Optimizer and comb through to detangle the hair.

• Apply if required Structure + Shine Protection to sensible and porous areas using brush and bowl.

• Apply the Structure + Shine Agent 1 to the part you need to curl.

• Process according to the usage instructions.

HAIR TEXTURE:
Resistant

AGENT 1:
0 – Strong

PROCESSING TIME:
18 – 25 min

DIGITAL PERM SERVICE
Select the appropriate heating time according to the hair structure and digital setting perm machine recommendation.

HAIR TEXTURE:
Normal

AGENT 1:
1 – Regular

PROCESSING TIME:
12 – 18 min

DIGITAL PERM SERVICE
Select the appropriate heating time according to the hair structure and digital setting perm machine recommendation.

HAIR TEXTURE:
Porous

AGENT 1:
2 – Medium

PROCESSING TIME:
12 – 15 min

DIGITAL PERM SERVICE
Select the appropriate heating time according to the hair structure and digital setting perm machine recommendation.

HAIR TEXTURE:
Damaged

AGENT 1:
3 – Soft

PROCESSING TIME:
8 – 12 min

DIGITAL PERM SERVICE
Select the appropriate heating time according to the hair structure and digital setting perm machine recommendation.

AGENT 1

Hair: Short
Recommended Amount: 80 g

Hair: Middle
Recommended Amount: 100 g

Hair: Long
Recommended Amount: 120 g

• To ensure the hair is sufficiently relaxed perform a knot test on 2–3 very thin strands on different areas of the head. Use one of the two knot tests.

Knot Test 1:
Form a knot, then tighten it by pulling to create a small loop (1 cm in diameter), release the tension.

• Knot-loop remains closed =
hair is relaxed, proceed with the service

• Knot widens or opens =
extend the processing time, then repeat the test

Knot Test 2:
Wrap a hair strand around the tip of the tail comb and hold for 5 seconds, then release.

• The spiral form remains =
hair is relaxed, proceed with the service

• The spiral form opens =
extend the processing time, then repeat the test

• When satisfied with the relaxation rinse the hair thoroughly (for 3–5 minutes), then towel dry the hair.

• Apply Structure + Shine Optimizer prior to blow dry for detangling and heat protection, then comb gently.

• Winding: Choose the right size of rods for the hairstyle.

• Connect the rods with a heat perm device.

• Select the appropriate heating time according to the hair structure and digital setting perm machine recommendation. As long as the hair is wet, temperatures above 100 °C should be avoided. Let the hair cool down after end of processing time.

• Apply Structure + Shine Agent 2 over the top of rods to stabilize the curl result. Process for 8–10 minutes without heat.

• With very long hair, re-apply the Structure + Shine Agent 2 after unwinding the rods. Process and rinse again.

AGENT 2

Hair: Short
Recommended Amount: 80 ml

Hair: Middle
Recommended Amount: 100 ml

Hair: Long
Recommended Amount: 120 ml

• Rinse thoroughly (3–5 minutes). Treat with appropriate Dualsenses or Kerasilk products. Use StyleSign products to give the perm look a perfect finish.